Español Русский Português Français English

Irrigation Injection Pumps

For Your Irrigation, Chemigation and Fertigation Needs

Our fertilizer injection pumps and chemical injection pumps are available in both simplex and duplex models for your advanced fertigation and chemigation needs. All wetted internal parts exposed to chemicals and fertilizers are made from 316 stainless steel, chemically resistant polypropylene and the highest quality seals available today.

E-Z Meter Chemical Injection Pump Features

Chemical Injection Pump - #20620
  1. Pumping cylinders can be mounted in parallel for large volume applications or for injection of two non-compatible products.
  2. A simple change of stoke length sets the precise flow to be injected.
  3. Maximum pressure 150 psi.

Full Range Fertilizer Injection Pump Features

Large, Rugged Totally Enclosed Large Range Pump Units
  1. All working parts are totally enclosed for maintenance free service.
  2. All wetted parts are constructed with corrosion resistant stainless steel to ensure optimum performance over many years of service.
  3. Rates are easily adjusted with the dial pointer located on the side of the pump, which changes the length of the stroke.
  4. Depending on the pump model, units are available with 3/4 or 1 1/2 HP motor and gearbox.
  5. Pump models have a range of application from 1.6 to 114 GPH all the way up to 6 to 470 GPH.
E-Z Meter
Injection Pump
Chemical Injection Pump
FEATURES:   <hide>
  • See above.
SPECIFICATIONS:   <hide>
Model Power Source Flow Rate
5-30 GPH
(simplex)
5-30-5-30 GPH
(duplex)
5-30-10-100 GPH
(duplex)
10-100 GPH
(simplex)
10-100-10-100 GPH
(duplex)
01620 Belt Drive Supported        
01622 Belt Drive   Supported      
01623 Belt Drive     Supported    
01630 Belt Drive       Supported  
01633 Belt Drive         Supported
02620 Honda Engine Supported        
02622 Honda Engine   Supported      
02623 Honda Engine     Supported    
02630 Honda Engine       Supported  
02633 Honda Engine         Supported
10620 110-220 Volt, 1ph Supported        
10622 110-220 Volt, 1ph   Supported      
10623 110-220 Volt, 1ph     Supported    
11630 110-220 Volt, 1ph       Supported  
10633 110-220 Volt, 1ph         Supported
20620 220-440 Volt, 3ph Supported        
20622 220-440 Volt, 3ph   Supported      
20623 220-440 Volt, 3ph     Supported    
21630 220-440 Volt, 3ph       Supported  
20633 220-440 Volt, 3ph         Supported
30620 12 Volt DC Motors Supported        
30622 12 Volt DC Motors   Supported      
30623 12 Volt DC Motors     Supported    
30630 12 Volt DC Motors       Supported  
30633 12 Volt DC Motors         Supported
OPTIONS:   <hide>
  • Acid pumps with Teflon cylinders, ideal for acid applications. Add -1 after the part number.
  • For stainless steel check valves contact us.
DOCUMENTATION:   <hide>

Free Adobe Acrobat Reader

Full Range
Injection Pump
Chemical Injection Pump
FEATURES:   <hide>
  • See above.
SPECIFICATIONS:   <hide>
Model Phase Model
Type
Low Range
GPH
High Range
GPH
Max
Pressure
PSI
Max
Power
HP
GPH
Range
IN-11610 Single Simple 2.6-26.6 5.9-59 120 1 1/2 2.6-117
Single Duplex 5.2-52.4 11.7-117.4 120 1 1/2 2.6-117
IN-11630 Three Simplex 1.6-15.5 5.7-57 120 3/4 1.6-114
Three Duplex 3.1-31 11.4-114 120 3/4 1.6-114
IN-23510-NGP Single Simplex 5.5-55 12-122 120 1 1/2 5.5-242
Single Duplex 11-108 24-242 120 1 1/2 5.5-242
IN-23530-NGP Three Simplex 3-32 12-119 120 3/4 3-235
Three Duplex 6-64 24-235 120 3/4 3-235
IN-47010-NGP Single Simplex 8.2-81.9 18.4-183.8 120 1 1/2 8.2-363
Single Duplex 16.2-162 36.3-363 120 1 1/2 8.2-363
IN-47030-NGP Three Simplex 6-64.8 24-238 120 1 1/2 6-470
Three Duplex 12-128 48-470.2 120 1 1/2 6-470
OPTIONS:   <hide>
  • 316 stainless steel available on any IN-235 or IN-470 models. Add "-S" after the part number.
DOCUMENTATION:   <hide>

Free Adobe Acrobat Reader