Chemical Injection Pumps

Our broad range of injection pumps are available in both simplex and duplex models. All wetted internal parts exposed to chemicals and fertilizers are made from 316 stainless steel, chemically resistant polypropylene and the highest quality seals available today.

Features

1. Pumping cylinders can be mounted in parallel for large volume applications or for injection of two non-compatible products.
2. A simple change of stoke length sets the precise flow to be injected
3. Maximum pressure 150 psi.

 

E-Z Meter Simplex Pumps*

E-Z Meter Simplex Pump 02633
Model	Power Source	Flow Rate
		5-30 GPH (simplex)	5-30-5-30 GPH (duplex)	5-30-10-100 GPH (duplex)	10-100 GPH (simplex)	10-100-10-100 GPH (duplex)
01620	Belt Drive
01622	Belt Drive
01623	Belt Drive
01630	Belt Drive
01633	Belt Drive
02620	Honda Engine
02622	Honda Engine
02623	Honda Engine
02630	Honda Engine
02633	Honda Engine
10620	110-220 Volt, 1ph
10622	110-220 Volt, 1ph
10623	110-220 Volt, 1ph
11630	110-220 Volt, 1ph
10633	110-220 Volt, 1ph
20620	220-440 Volt, 3ph
20622	220-440 Volt, 3ph
20623	220-440 Volt, 3ph
21630	220-440 Volt, 3ph
20633	220-440 Volt, 3ph
30620	12 Volt DC Motors
30622	12 Volt DC Motors
30623	12 Volt DC Motors
30630	12 Volt DC Motors
30633	12 Volt DC Motors

*-1 after the part number indicates acid pumps with Teflon cylinders, ideal for acid applications. For stainless steel check valves contact the factory.

E-Z Meter Field Conversion Parts and Options

Backflow Check Valve for Irrigation Line 115026-HS
Model	Description
50520*	Duplex Field Conversion 5-30 GPH E-Z Meter Pump
50530*	Duplex Field Conversion 10-100 GPH E-Z Meter Pump
115026-HS	1/4" FPT x 1/4" NPT 316 SS Backflow Check Valve for Irrigation Line, 10 psi cracking pressure
115030	1/4" MNPT x 1/4" FNPT Backflow Check Valve for Irrigation Line

Full Range Fertilizer Injection Units

Large, Rugged Totally Enclosed Large Range Pump Units

1. All working parts are totally enclosed for maintenance free service.
2. All wetted parts are constructed with corrosion resistant stainless steel to ensure optimum performance over many years of service.
3. Rates are easily adjusted with the dial pointer located on the side of the pump, which changes the length of the stroke.
4. Depending on the pump model, units are available with 3/4 or 1 1/2 HP motor and gearbox.
5. Pump models have a range of application from 1.6 to 114 GPH all the way up to 6 to 470 GPH.

Chemical Injection Pump IN-11630
Model	Phase	Model Type	Low Range GPH	High Range GPH	Max Pressure PSI	Max Power HP	GPH Range
IN-11610	Single	Simple	2.6-26.6	5.9-59	120	1 1/2	2.6-117
	Single	Duplex	5.2-52.4	11.7-117.4	120	1 1/2	2.6-117
IN-11630	Three	Simplex	1.6-15.5	5.7-57	120	3/4	1.6-114
	Three	Duplex	3.1-31	11.4-114	120	3/4	1.6-114
IN-23510	Single	Simplex	5.5-55	12-122	120	1 1/2	5.5-242
	Single	Duplex	11-108	24-242	120	1 1/2	5.5-242
IN-23530	Three	Simplex	3-32	12-119	120	3/4	3-235
	Three	Duplex	6-64	24-235	120	3/4	3-235
IN-47030	Three	Simplex	6-64.8	24-238	120	1 1/2	6-470
	Three	Duplex	12-128	48-470.2	120	1 1/2	6-470