The newly released CDS-John Blue VisaGage is cost -effective and simple to install. CDS-John Blue Company is offering flow monitors for spraying or fertilizer applications in single columns or in sets of four flow monitor assemblies. Plus most CDS-John Blue Flow Monitor parts are interchangeable with other brands already on the market today.
CDS-John Blue VisaGage II is manufactured with chemical resistant polypropylene adapters and clear PVC body with an additive for UV protection. Viton o-rings are also standard. There are no electronic parts that could potentially fail.
Proper Application = Increased Yields
- With the CDS-John Blue VisaGage II you will know immediately if an outlet is plugged, thus causing possible variations in your application rates.
- So easy - See the balls in line and know your rate is uniform.
- When ball is lower you know there is a restriction at the outlet, hose or opener supplied by that flow monitor.
- A ball higher than the others is an indication that hoses or fittings supplied by that specific flow monitor is broken or has a leak.
Customize Your Visual Flow Monitor System
- Get the exact number of flow monitors for spraying or fertilizer applications by simply banking together single columns, part numbers SMSS1 (spraying) and SMFD1 (fertilizer applications).
- The set of 4 flow monitor assemblies (SMSS4 or SMFD4) can also be connected for additional columns divisible by four. Clasp them together with the stainless steel clips and o-rings and go.
- The CDS-John Blue VisaGage II allows the use of common stainless steel orifice plates.
- Ports are standard NPT - Use our barb or convenient push connect fittings for simple installation.
- Most parts are interchangeable with other brands such as Redball LLC© and Wilger Industries©.
Visa Gage II Liquid Flow Rate Monitor |
| Model |
Description |
| For Use with Sprayers* |
| SMSS1 |
Single Flow Monitor Assembly - Spray Type includes single body, 3/8" NPT female inlet and outlet, (5) 1/2" diameter balls, end cap, Viton o-rings and stainless steel retainer clips. |
| SMSS4 |
Set of 4 Flow Monitor Assembly - Spray Type includes 4 bodies, 1/2" NPT female inlet, 3/8" NPT female outlet, (20) 1/2" diameter balls, end cap, Viton o-rings and stainless steel retainer clips. |
| For Use with Flow Dividers or Squeeze Tube Pumps: |
| SMFD1 |
Single Flow Monitor Assembly - Flow Divider Type includes single flow divider monitor body, 3/8" NPT female inlet and outlet, (5) 1/2" diameter balls, end cap, Viton o-rings and stainless steel retainer clips. |
| SMFD4 |
Set of 4 Flow Monitor Assembly - Flow Divider Type includes 4 bodies, 3/8" NPT female inlet and outlet, (20) 1/2" diameter balls, end cap, Viton o-rings and stainless steel retainer clips. |
| SMPT-0009 |
 Ball storage unit - optional - holds up to 40 balls (use one per set of 8 bodies). Lid can be locked. |
| SMPT-0014 |
Tee - optional - for spray type use with typically 8 total bodies, 1" NPT female inlet port and 1/4" female NPT port for gauge. |
| SMPT-0021 |
7/16" Stainless Steel Ball - optional - for use with extra high flow rates. |
| SMPT-0034 |
#112 Viton O-ring - optional - used to seal orifice plates, install plate in recess of the 3/8" NPT port adapters and then install the o-ring to retain and seal orifice plate. |
| *Most parts are interchangeable with Redball LLC© and Wilger Industries© equipment. |
